Table of Contents
Advertisement
Protocol Decoding
- Set the event table format: Press Format, rotate the multifunction knob
- Set the view type: Press View, rotate the multifunction knob
246
Line Number Time
Event Table
I2C Bus
Figure 15.6 I2C Decoding Event Table
NOTE
-
When you adjust the horizontal time base, the waveform displayed on the screen
will also change, and the total number of lines containing the decoding
information in the event table will also be changed.
-
The displayed decoded data information in the bus is related to the value of the
horizontal time base. Reducing the horizontal time base can help you view the
detailed information.
to select the display format of "Data" in the event table. Then, press down
the knob to select it. You can also press Format continuously or enable the
touch screen to select it. The available formats include Hex, Dec, Bin, and
ASC.
form of the event table to be viewed. Then, press down the knob to select it.
You can also press View continuously or enable the touch screen to select it.
The available choices include "Packets", "Details", and "Payload". You can
also tap "Packets", "Details", or "Payload" at the top of the event table to
select it.
If you select "Packets", the decoded data, time, and other information are
displayed in the event table. If you select "Details", the detailed data in the
specified row will be displayed in the event table. If "..." appears in the row of
R/W Bit Address
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Acknowledgement
Decode Data
to select the
Advertisement
Table of Contents
