Table of Contents
Advertisement
What This Chapter Contains
Configure a SmartGuard
Controller
61
Configure Modules in RSNetWorx for
DeviceNet Software
This chapter provides information about how to configure Guard I/O
modules by using RSNetWorx for DeviceNet software and a
SmartGuard controller. Refer to the corresponding software help files
for network-configurator operating procedures.
This chapter covers how to configure a SmartGuard controller and
Guard I/O module by using Universal Serial Bus (USB) connectivity.
For related information, see the appendix that contains sample
SmartGuard application code.
Use this procedure to configure a SmartGuard controller and Guard
I/O module by using Universal Serial Bus (USB) connectivity.
1. Be sure you have these required items:
RSNetWorx for DeviceNet software, version 8.0 or later
RSLinx software, version 2.51 or later
SmartGuard USB driver
Personal computer with Microsoft Windows 2000,
Microsoft Windows 2000 Terminal Server, or
Microsoft Windows XP
2. Load the SmartGuard USB driver onto your computer, noting the
folder location, as you need to browse to it later.
Chapter
Publication 1791DS-UM001H-EN-P - April 2009
5
Advertisement
Table of Contents
