Rockwell Automation 1732DS-IB8 User Manual page 184

180 Specifications
Publication 1791DS-UM001H-EN-P - April 2009
Environmental Specifications
Attribute
Reaction Time
Input Reaction Time, Max
Output Reaction Time, Max 6.2 ms + (20 ms) relay response time
Signal Sequence
While safety outputs are in an on state, the signal sequence shown in the
figure is output continuously for fault diagnosis. Confirm response time of
device connected to safety outputs so the device does not malfunction due
to off pulse.
Certifications
Certification
Certifications
(when product is
(1)
marked)
(1)
See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other
certification details.
(2)
When used with specified firmware revisions.
Value
16.2 ms + set values of ON/OFF delays
Typ. 600 ms
Typ. 700 μs
Value
c-UL-us UL Listed Industrial Control Equipment, certified
for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D
Hazardous Locations, certified for U.S. and
Canada. See UL File E194810.
CE European Union 89/336/EEC EMC Directive,
compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial
Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers
(Clause 8, Zone A & B)
C-Tick Australian Radiocommunications Act, compliant
with:
AS/NZS CISPR 11; Industrial Emissions
ODVA ODVA conformance tested to DeviceNet
specifications
TUV TÜV Certified for Functional Safety up to and
including Category 4 and SIL 3
UL UL Certified for Functional Safety up to and
including Category 4 and SIL 3
44072
(2)
(2)