Table of Contents
Advertisement
About This Publication
Download Firmware, AOP,
EDS, and Other Files
Summary of Changes
Additional Resources
Resource
FLEX I/O Thermocouple/RTD Input Analog Module Installation Instructions,
publication
1794-IN050
EtherNet/IP Network Devices User Manual, publication
ControlNet Network Configuration User Manual, publication
Ethernet Reference Manual, publication
Industrial Automation Wiring and Grounding Guidelines, publication
Product Certifications website,
rok.auto/certifications
This manual is a reference guide for the FLEX™ I/O Thermocouple, RTD, Millivolt Input Modules. It
describes the procedures for installing, configuring, and troubleshooting your module.
Download firmware, associated files (such as AOP, EDS, and DTM), and access product release
notes from the Product Compatibility and Download Center at rok.auto/pcdc.
This publication contains the following new or updated information. This list includes substantive
updates only and is not intended to reflect all changes.
Topic
Updated template
Added inclusive terminology statement
Corrected wording in an Important table
These documents contain additional information concerning related products from Rockwell
Automation. You can view or download publications at rok.auto/literature.
ENET-UM006
CNET-UM001
ENET-RM002
1770-4.1
Rockwell Automation Publication 1794-UM012D-EN-P - March 2023
Description
Information on how to install the Thermocouple/Millivolt Input Modules (1794-IRT8, 1794-IRT8XT).
Describes how to configure and use EtherNet/IP™ devices to communicate on the EtherNet/IP
network.
Describes how to use ControlNet® communication modules with Logix 5000® controllers.
Describes basic Ethernet concepts, infrastructure components, and infrastructure features.
Provides general guidelines for installing a Rockwell Automation industrial system.
Provides declarations of conformity, certificates, and other certification details.
Preface
Page
throughout
2
18
5
Advertisement
Table of Contents
