Table of Contents
Advertisement
36
Install and Connect Your Modules
Install the Module
Publication 1791DS-UM001H-EN-P - April 2009
When installing a module follow these instructions.
IMPORTANT
Use DIN rail that is 35 mm (1.38 in.) wide to install the module in the
control panel. See the figures for required spacing.
Horizontal Module Installation
Wiring Duct
End Plate
Wiring Duct
Use the module in an environment that is within the general
specifications.
Use the module in an enclosure rated IP54 (IEC60529) or
higher.
Use DIN rail that is 35 mm (1.38 in.) wide to mount the module
in the control panel.
Always use an end plate on each end of the module to secure
it for 1791DS-IB12, 1791DS-IB8XOB8, and 1791DS-IB4XOW4
modules.
Place other heat sources an appropriate distance from the
module to maintain the specified ambient temperatures
around the module.
50 mm (1.96 in.) Min
50 mm (1.96 in.) Min
35 mm (1.38 in.) DIN Rail
End Plate
44088
Advertisement
Table of Contents
