Table of Contents
Advertisement
What This Chapter Contains
Use the Help Button
Add Safety Modules to the
I/O Configuration Tree
From the I/O Configuration tree,
right-click the 1756-DNB module
and select New Module.
41
Configure Modules in RSLogix 5000 Software
This chapter provides information about how to configure your
modules in RSLogix 5000 software.
At the bottom of a dialog, click Help for information about how to
complete entries on the dialog. At the bottom of a warning dialog,
click Help to get information about that specific error.
To add a safety module to the I/O configuration tree, follow this
procedure.
1. From the I/O Configuration tree, right-click the 1756-DNB
module, as shown in the figure, and select New Module.
Chapter
Publication 1791DS-UM001H-EN-P - April 2009
4
Advertisement
Table of Contents
