Rockwell Automation 1732DS-IB8 User Manual page 53

Output Data Options
Choose from these options.
The standard outputs on the module must not be used for safety
IMPORTANT
purposes.
None - Selecting None results in a Listen-only connection to the
module. Inputs and status are read, but no outputs are written.
Safety - Selecting Safety creates these safety tags and enables
these outputs for use in the safety task.
Test - Selecting Test creates these tags and enables the four
standard outputs on the module. These outputs are standard
outputs and must not be used for safety purposes.
Combined - Selecting Combined creates these tags and enables
all module outputs - safety and standard.
Configure Modules in RSLogix 5000 Software
Publication 1791DS-UM001H-EN-P - April 2009
49