Rockwell Automation 1732DS-IB8 User Manual page 70

66 Configure Modules in RSNetWorx for DeviceNet Software
Publication 1791DS-UM001H-EN-P - April 2009
4. From the Configure Drivers dialog, click Add New.
5. From the Add New RSLinx Classic Driver dialog, click OK to see
the Configure SmartGuard USB Device dialog.
6. From the Configure SmartGuard USB Device dialog, click 1752
SmartGuard USB Port, noting that the MAC address and Baud
Rate fill in and the OK button highlights if the SmartGuard
controller is connected properly on the USB link.