48
Configure Modules in RSLogix 5000 Software
Publication 1791DS-UM001H-EN-P - April 2009
Combined Status-Muting
– A single BOOL tag represents an AND of the status bits for all
the input points. For example, if any input channel has a
fault, this bit goes LO.
– A single BOOL tag represents an AND of the status bits for all
the output points.
– A muting status tag for test output T3.
Point Status-Muting-Test Output
– Status tags for each of the input and output points.
– Muting status tag for test output T3.
– Status tags for each of the test outputs.
(1)
When using combined status, use explicit messaging to read individual point status for diagnostic purposes.
(1)
(1)