20
Understand the Operation of Safety Functions
Safety Inputs
Publication 1791DS-UM001H-EN-P - April 2009
Configuration Lock
After configuration data has been downloaded and verified, the
configuration data within the module can be protected either by using
RSNetWorx for DeviceNet or RSLogix 5000 software.
If the data is protected, the lock indicator on the front panel lights in
solid yellow. If the data is not protected, the lock indicator on the
front panel flashes in yellow.
Read this section for information about safety inputs.
Test Pulse from Test Output
A test output is used in combination with a safety input. Specify the
corresponding-test output terminal to use as the test source.