17.5 STOPPING THE SYSTEM
Controllers and appliances can be stopped using the methods outlined below:
Stop individual controllers:
Safety-Rated Stopping Methods:
•
External Ignition Switch (If installed and enabled) – Turn switch to stop position.
ESD input – Toggle input to de-energized position.
•
Non-Safety-Rated Stopping Methods:
•
Modbus – Write stop command to the Start/Stop Modbus register (30100/40100). Refer to
Modbus Register Map
User Interface – Navigate to desired controller status screen, press
•
press
.
Stop individual appliance:
User Interface – Navigate to desired appliance status screen, press
•
.
Stop all appliances:
User Interface – From any screen, press
•
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
for details.
, select "All Appliances", then press
PF3100 Product Manual
DOC-001149 v8.0
PF3107-00
, select "This Controller", then
, select "This Appliance", then press
.
165