ProFire PF3100 Product Manual page 170

3. Advance to the Review Tab and make note of any issues that will require additional commissioning (e.g.,
Calibration information does not transfer over to a replacement controller. Output calibration must be
done separately for each controller using the Output Calibration Wizard), then select "Accept" to complete
the swap.
18.2.2 MODULE SWAP
The Module Swap tool allows I/O cards to be removed from the system and replaced without the need to
reconfigure each module.
1. Navigate to the Swap Wizard and select "Module".
2. The Swap Modules Tab lists all the non-communicating cards that are expected to be communicating with
the system. Select a card and assign an appropriate replacement card.
3. Repeat previous step for all listed cards.
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
PF3100 Product Manual
DOC-001149 v8.0
170