ProFire PF3100 Product Manual page 141

54. Select "Configure O
55. Specify Target O
on the table are linearly interpolated from the configured points.
56. Ensure that O trim profiles for both Curve A and Curve B are configured correctly and select "Finished".
2
57. Press then
16.9.4 REVIEW TAB
58. Ensure that there are no errors and select "Accept" to save all changes and exit the FARC/O
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
Curve" to configure the oxygen trimming profiles.
2
, Max Trim and Min trim values for every firing rate increment. All unconfigured columns
2
to advance to the Review Tab.
PF3100 Product Manual
DOC-001149 v8.0
Trim Wizard.
2
141