Commissioning; Passwords; Update Firmware - ProFire PF3100 Product Manual

16 COMMISSIONING

Ensure that all modules and instrumentation are mounted and wired in accordance with local safety codes and
design documentation then follow the steps outlined in the sections below to commission the system.
Warning:
System settings and appliance configuration details must only be modified by qualified
!
personnel familiar with the both the appliance under PF3100 control and related plant processes that
could be affected.

16.1 PASSWORDS

Each setting and configuration wizard has a pre-defined security level based on its potential safety and reliability
impact. To modify any setting, the password corresponding to its security level must first be entered. The security
levels are as follows:
L1 security level: Settings that do not impact the safety-integrity of the system but can impact operation.
•
L2 security level: Settings that impact the safety-integrity of the system.
•
• L3 security level: Settings that impact fuel-air ratio control applications.
PF3100 passwords are not published publicly. Please refer to the documentation accompanying your PF3100 order
or Contact Profire technical support.

16.2 UPDATE FIRMWARE

The firmware must match on (1) the User Interface, (2) all BMS controllers and (3) all connected I/O cards for the
system to operate as intended.
1. Ensure all cards are powered on and connected to the PFRN communication network.
2. Update all cards to ensure that they are all running the same version of firmware. Refer to the
Update section for instructions.
3. Use the Network Discovery Tool
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
to troubleshoot firmware and communication issues.
PF3100 Product Manual
DOC-001149 v8.0
Firmware
125