14 INSTALLATION
Warning: Installation and modification shall not be performed while the system is energized.
!
Disconnect power source prior to connecting devices or modifying wiring.
Installers and commissioners of the PF3100 system must:
Understand local codes and how they apply to the installation (for both electrical and mechanical aspects
•
of the installation),
•
Understand the electrical and mechanical limitations of the product,
Understand the safety and operational effects of modifying system settings or wiring,
•
Verify all required safety functions prior to completing the commissioning of the appliance,
•
•
Be fluent in the English language (the only language this product supports),
•
Be familiar with navigating the product menus and modifying settings.
14.1 MOUNTING CONSIDERATIONS
The UIX, CTX and AUX enclosures should be mounted:
•
Upright in such a way that the screen/status indicators are clearly visible (if applicable),
•
Near to the appliance/burner/component being controlled to minimize cable run lengths while maintaining
hazardous location requirements,
Such that the enclosure door can be fully opened during maintenance and commissioning,
•
•
Such that the screen and keypad are protected from direct sunlight exposure.
The EPX and TLX enclosures should be mounted:
Close to the burner/temperature element under control to limit cable run lengths,
•
In an orientation that maintains accessibility during maintenance and commissioning.
•
14.1.1 HAZARDOUS LOCATION MOUNTING
Warning: EXPLOSION HAZARD – Substitution of components may impair suitability for hazardous
!
locations.
Warning: Do not drill holes in, or otherwise modify, any enclosures as any such modifications will
!
compromise hazardous location suitability.
Warning: Appropriately zoned wiring methods must be used between modules to maintain hazardous
!
location ratings.
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
PF3100 Product Manual
DOC-001149 v8.0
107