ProFire PF3100 Product Manual page 176

18.5.2 RESTORE
The Settings Restore utility is used to load system settings from a USB storage device. This is useful for situations
requiring a BMS Controller replacement or commissioning of a system that has identical configuration
requirements as one that is already commissioned.
18.5.2.1 SETTINGS RESTORE PROCEDURE
1. Insert USB drive containing desired settings file into the USB port on the PF3100-00 User Interface card.
2. Navigate to the Settings Restore tool and press
3. Select desired settings file from the USB device or local UI storage.
4. On the Select Tab, choose whether to restore (1) the UI settings only, (2) the controller settings only, or (3)
all the settings.
5. On the Assign Tab, select the controller to which the settings are to be restored.
6. Proceed to the Review Tab and select "Accept" to confirm the restore.
7. Review the Results, and check/recommission any settings that were not restored successfully (e.g., If a
settings file from a controller is restored on another controller, the calibration settings will not be restored
to the new controller – output calibration must be re-performed through the Output Calibration Wizard
following the restore).
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
.
PF3100 Product Manual
DOC-001149 v8.0
176