Farc Tuning Settings - ProFire PF3100 Product Manual

16.11 FARC TUNING SETTINGS

60. Configure all FARC settings in accordance with manufacturer specifications and safety design
documentation. Manual Mode must be Enabled to make changes to the table. Refer to the
User Guide for detailed configuration instructions.
Setting
Manual Mode
Manual Firing Rate
Selected Curve
Fuel-Air Ratio Table Firing Rate
Fuel-Air Ratio Table - Air
Fuel-Air Ratio Table - Fuel
Fuel-Air Ratio Table – Aux Channels
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
Options
Enabled
Disabled
0 - 100%
Curve A
Curve B
Not adjustable – fixed 5%
increments
0 – 100%
0 – 100%
0 – 100%
PF3100 Product Manual
Description
When in the Process Control state, the system
sets the firing rate to match the configured
Manual Firing Rate setting and moves all
channel outputs to their corresponding
positions from the active FARC table.
The system ignores the Manual Firing Rate
setting below.
Specifies the firing rate of the system when
the Manual Mode setting is set to Enabled.
Specifies that configuration changes made
from this menu apply to FARC Curve A
Specifies that configuration changes made
from this menu apply to FARC Curve B
Specifies the firing rate to which all values in
the column apply
Specifies the air actuator position for a given
firing rate.
Specifies the fuel actuator position for a given
firing rate.
Specifies the auxiliary channel actuator
position for a given firing rate.
DOC-001149 v8.0
PF3100 FARC
160