Software Utilities; Quick Start Setup Tool; Swap Wizard - ProFire PF3100 Product Manual

18 SOFTWARE UTILITIES

The following section outlines the diagnostic, troubleshooting and upgrade tools available on all PF3100 systems.

18.1 QUICK START SETUP TOOL

The Quick Start Setup tool is accessible only when the system has no configured appliances. The tool guides the
user through a firmware update and the Appliance, Temperature and Pilot Wizards to achieve basic system
configuration. Refer to the

18.2 SWAP WIZARD

18.2.1 CONTROLLER SWAP
The Controller Swap tool is used to replace BMS controller cards in already-commissioned systems. A new
controller is inserted into the system in place of the previous controller without the need to reconfigure all
connected I/O modules or BMS settings.
1. Navigate to the Swap Wizard and select "Controller".
2. Choose a valid settings file to load, then select the originally commissioned controller on the Swap Modules
tab and its replacement from the "Available Controllers" dialog.
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
Commissioning section above for additional commissioning details.
PF3100 Product Manual
DOC-001149 v8.0
169