17.2 ACCESSING SYSTEM STATUS INFORMATION
17.2.1 REAL-TIME STATUS INFORMATION
Useful status information is displayed on the Appliance Status Screen and Controller Status Screen. Advanced
status information can be found on the Flame Diagnostics Screen and System Data Screen. The information
available includes but is not limited to:
Controller state information
•
•
Input readings
Output status
•
Flame quality
•
17.2.2 ALERT ANNUNCIATION
All alerts are annunciated on the Alerts Screen while active and can be found in the Event Log after they have been
cleared. The alert types are as follows:
Alarm – Prevents the controller from entering any running state.
•
Wait – Prevents the controller from entering any fuel state.
•
•
Main Permissive – Prevents the controller from entering any main fuel state.
Warning – Provides information to the user but does not affect system behavior.
•
Refer to the
Alert Codes
17.3 ADJUSTING SETPOINTS
The Quick Adjust Dialog can be accessed, while the appliance is running, from the Appliance Status Screen by
pressing
and entering a valid password.
Process Setpoint, Low Fire Setpoint and Pilot Off Setpoint for the appliance. Additional settings and configuration
wizards cannot be accessed while the appliance is running and must be modified by capable personnel only.
17.4 ADJUSTING INPUT AND OUTPUT SETTINGS
Configurable inputs and outputs can be adjusted from the Appliance Status screen by selecting the desired item
and pressing
to bring up a configuration dialog. Use the keypad to adjust the settings as desired. The
displayed settings are dependent on the security level of the password used to access the menu.
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
section for descriptions of each alert.
and
can then be used to incrementally adjust the configured
PF3100 Product Manual
DOC-001149 v8.0
164