Pfrn Port - ProFire PF3100 Product Manual

6.7

PFRN PORT

6.7.1 DETAILS
Terminals
Name
Type
6.7.2 INTENDED FIELD DEVICE CONNECTIONS
Field Device
PF3101-00 BMS card PFRN I/O
Network port
PF3101-00 BMS card PFRN I/O
Network port via PF3106-00
Network Switch card
6.7.3 SYSTEM BEHAVIOR – PFRN DIAGNOSTIC LEDS
Name Color LED Behavior
Off
Pwr Blue
On – Solid
On – Flickering
Off/flickering
Link Green
On – Solid
6.7.4 SYSTEM BEHAVIOR UPON COMMUNICATION LOSS
Refer to BMS PFRN I/O Network System Behavior
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
10
PFRN
PFRN I/O Network Port
Configuration Requirements
Pilot Wizard > Allocate Pilot Tab
Enabled/Disabled: Enabled
Controller Settings > Setup > Other
Comm Loss Restart: As desired
Pilot Wizard > Allocate Pilot Tab
Enabled/Disabled: Enabled
Controller Settings > Setup > Other
Comm Loss Restart: As desired
Interpretation
Port has no power
Port has power
Port has intermittent power
Port is not communicating
Port is communicating normally
for behavior under communication loss conditions.
PF3100 Product Manual
PF3102-00
XX:00:00:00:XX:XX
139750
2021-12-31
v2.2.x
LEL
COIL
MAIN
PILOT
Connection Diagrams
PFRN Connector Wiring
I/O Card PFRN Wiring Options
Issue/Corrective Action
No BMS Power - Make sure BMS
Controller card is powered on.
Wiring fault - Check PFRN wire
terminations at BMS and Pilot card.
Hardware fault - Contact Profire
replacement.
N/A
Wiring fault - Check PFRN wire
terminations at BMS and Pilot card.
Hardware fault - Contact Profire
replacement.
No PFRN Communication – Cycle power
to BMS card and check PFRN wire
terminations at BMS and Pilot card.
N/A
DOC-001149 v8.0
CAT5/6
PF3102-00 Ion Pilot Module
v2.2
for
for
49