ProFire PF3100 Product Manual page 113

14.3.10 HFV OUTPUT - FAN CONTROL WIRING
PF3101-00 BMS Controller Card
HFV-
6 -
HFV+
7 -
SSV2-
8 -
SSV2+
9 -
SSV1-
10 -
SSV1+
11 -
12 - Pilot-
13 - Pilot+
14 - Aux Out-
15 - Aux Out+
14.3.11 RUN STATUS – AC SOURCE
PF3101-00 BMS Controller Card
12-24 VDC
1 -
2 - Common
3 - Earth GND
4 -
5 -
!
Warning: 120VAC wiring should be installed by a qualified electrician.
14.3.12 RUN STATUS – DC SOURCE
PF3101-00 BMS Controller Card
12-24 VDC
1 -
2 - Common
Earth GND
3 -
4 -
5 -
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
Installation Notes:
Fan Enable
Relay
1. A relay must be used to isolate the HFV contacts from
R1 R1
FAN
To external
power supply
Installation Notes:
Power Source
N L G
Control
Panel
Status
Indicator
Installation Notes:
1.
Power Source
- + G
Control
Panel
Status
Indicator
high-transient currents from the fan motor.
1. BMS Controller card Status contact wiring shown as an
example only. The I/O Expansion card status contacts
can be wired in the same way.
BMS Controller card Status contact wiring shown as an
example only. The I/O Expansion card status contacts
can be wired in the same way.
PF3100 Product Manual
DOC-001149 v8.0
113