Hardware Installation Diagrams - ProFire PF3100 Product Manual

14.2 HARDWARE INSTALLATION DIAGRAMS

14.2.1 ION PILOT MODULE
14.2.2 TEMPERATURE MODULE
14.2.3 REPLACEMENT CARDS
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
Installation Notes:
1. Install four #10-32 screws through the Ion Pilot card to attach it
to the coil bracket.
2. Tighten to 26 in•lbs
3. Loosen two adjacent #6-32 screws from bottom inside of
enclosure, then line up bracket and tighten down the screws
4. Install enclosure lid making sure it is fully seated.
5. Tighten #10-32 enclosure lock screw.
Installation Notes:
1. Install two #10-32 screws through the Temperature card into the
enclosure standoffs.
2. Tighten to 26 in•lbs
3. Install enclosure lid making sure it is fully seated.
Installation Notes:
1. Install four #10-32 screws through the card into the enclosure
standoffs.
2. Tighten to 26 in•lbs
3. Close enclosure door and secure lock with a flat head
screwdriver.
PF3100 Product Manual
DOC-001149 v8.0
109