ProFire PF3100 Product Manual page 189

Code
Alert Name
UI/Modbus
Manual O
2
1149 150
Manual FARC
O Trim Requires Correctly
2
1150 151
Commissioned Curves
FARC Enabled on a
1151 152
Multi-Controller System
1152 153 IO Expansion Span Config Error
1153 154 Controller Not In An Appliance
Low Heat Standby
1154 155
Configuration Error
FARC Feedback Configuration
1155 156
Error
1156 157 O2 Trim Requires an O2 Sensor
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
Trim Requires O Trim Manual Mode setting is enabled, and FARC Manual Mode setting is
2
disabled
Commissioned O
values set, or vice versa. The FARC table must also be commissioned.
FARC is enabled on an appliance that has more than one controller.
An IO Expansion input has equal Span Max and Span Min settings.
A controller is not recognized by the appliance. Re-run the Appliance
Wizard.
Low Heat Standby setting is Enabled and BMS Aux Output setting is not set
to one of the following:
An assigned FARC channel feedback input is not the correct type. Re-run
the FARC/O2 Trim Wizard.
O2 Trim setting is Enabled and no O2 Sensor has been configured in the
I/O Expansion Wizard.
Description
Trim target values do not have corresponding offset
2
Manual Control
•
PID Control
•
Appliance Firing rate
•
PF3100 Product Manual
DOC-001149 v8.0
189