ProFire PF3100 Product Manual page 171

4. Advance to the Review Tab and make note of any issues that will require additional commissioning (e.g.,
Calibration information does not transfer over to replacement I/O Expansion cards. Output calibration must
be performed again for replacement I/O Expansion cards using the Output Calibration Wizard), then select
"Accept" to complete the swap.
18.2.3 UI SWAP
The UI Swap tool allows the User Interface card to be removed from the system and replaced without the need to
reconfigure the UI card settings.
1. Navigate to the Swap Wizard and select "UI".
2. Select a valid settings file, confirm the on-screen network map and select "Yes" to complete the swap.
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
PF3100 Product Manual
DOC-001149 v8.0
171