Important Safety Information - ProFire PF3100 Product Manual

1

IMPORTANT SAFETY INFORMATION

Warning: All PF3100 installations must follow the installation, commissioning, operation and
maintenance procedures outlined in this manual. Failure to comply with the instructions and warnings
in this manual may result in death, serious injury, electrocution, property damage, product damage
!
and/or government fines.
electrical code(s) by a capable electrician and must be field inspected by the Authority Having
Jurisdiction to ensure compliance with local electrical and gas codes.
Warning: Do not disconnect power, open enclosures, or otherwise service the product unless area is
!
known to be non-hazardous.
Warning: Do not remove or replace fuses when system is powered. Replacement fuses must be
!
ceramic and of correct rating.
Warning: All safety functions being used must be end-to-end proven following commissioning of the
!
system.
Warning: Ignition coils can generate 20 kV - 40 kV at their high voltage output terminals and can cause
cardiac arrest. Do not touch or place any object near the ignition coil or connected ignition wire while
!
the product is operating. It is possible to draw a spark from several inches away if the pilot bracket is
not properly grounded.
Warning: Do not bypass any of the safety functions or modify any of the internal circuitry of the system.
!
Doing so can lead to death, serious injury, electrocution, property damage, product damage and/or
government fines.
Copyright © 2022, Profire Energy. All rights reserved.
855.PRO.FIRE | PROFIREENERGY.COM
All PF3100 installations must be performed in accordance with local
Contact Profire for replacement fuses.
PF3100 Product Manual
DOC-001149 v8.0
4