Gira KNX 2139 00 Product Documentation page 248

Logic functions | Limit value switch
Lower threshold value (H1)
This parameter defines the lower threshold value (H1) of the limit value switch.
This parameter is only available if the "data format" is set to "1 byte operating mode
switchover (DPT 20.102)".
Lower threshold value (H1)
This parameter defines the lower threshold value (H1) of the limit value switch.
This parameter is only available if the "data format" is set to "1 byte scene extension
(DPT 18.001)".
Lower threshold value (H1)
(0...255)
This parameter defines the lower threshold value (H1) of the limit value switch.
This parameter is only available if the "data format" is set to "1 byte value -0...255
(DPT 5.010)".
Lower threshold value (H1)
(0...100%)
This parameter defines the lower threshold value (H1) of the limit value switch.
This parameter is only available if the "data format" is set to "1 byte brightness value
0...100% (DPT 5.001)".
Lower threshold value (H1)
(0...65535)
This parameter defines the lower threshold value (H1) of the limit value switch.
This parameter is only available if the "data format" is set to "2 byte value 0...65535
(DPT 7.001)".
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
automatic (0)
Comfort mode (1)
Standby mode (2)
Night mode (3)
Frost/heat protection (4)
Recall scene 1 (0)
Recall scene 2 (1)
...
Recall scene 64 (63)
Save scene 1 (128)
Save scene 2 (129)
...
Save scene 64 (191)
0...255
0...100
0...65535
Page 248 of 257