Logic functions | Converter (1 bit -> 1 byte)
11.3.2 Converter object list
Object no.
970, 974,
978, 982,
986, 990,
994, 998
1-bit object as input of a converter. It is possible to configure whether the converter
responds to ON and OFF commands or alternatively processes only ON or only OFF
telegrams.
This object is only available if the type of logic function is configured to "converter".
Object no.
971, 975,
979, 983,
987, 991,
995, 999
1-bit object as disabling input of a converter. A disabled converter no longer pro-
cesses input states and consequently does not convert any new output values ( the
last value is retained and transmitted cyclically, if necessary).
The telegram polarity can be configured.
This object is only available if the type of logic function is configured to "converter".
Object no.
1106, 1107,
1108, 1109,
1110, 1111,
1112, 1113
1-byte object as value output of a converter.
This object is only available if the type of logic function is configured to "converter".
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Function
Converter Input
Function
Converter
Disabling function
Function
Converter Output
Name
Logic... - Input
Name
Logic... - Input
Name
Logic... - Output
Type
DPT
Flag
1-bit
1,002
C, (R), W, -,
A
Type
DPT
Flag
1-bit
1,002
C, (R), W, -,
A
Type
DPT
Flag
1 bytes 5,001
C, (R), -, T,
A
Page 226 of 257