Gira KNX 2139 00 Product Documentation page 174

Room temperature controller | Command value output and command
value limit
Object no.
936, 978,
1020, 1062,
1104, 1146,
1188, 1230,
1272, 1314,
1356, 1398
967, 1009,
1051, 1093,
1135, 1177,
1219, 1261,
1345, 1387,
1429 *
1-byte object to output the continuous command value for additional heating in two-
level operation. This object is only available in this way if the type of feedback con-
trol is configured to "Continuous PI control".
* These objects are only visible if, with combined heating/cooling command value,
separate command value objects are also displayed.
Function: Command value
Object no.
936, 978,
1020, 1062,
1104, 1146,
1188, 1230,
1272, 1314,
1356, 1398
967, 1009,
1051, 1093,
1135, 1177,
1219, 1261,
1345, 1387,
1429 *
1-bit object to output the continuous PWM command value for additional heating in
two-level operation. This object is only available in this way if the type of feedback
control is configured to "Switching PI control (PWM)".
* These objects are only visible if, with combined heating/cooling command value,
separate command value objects are also displayed.
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Function
Command value -
Additional level
heating
Command value -
Additional level
heating
Function
Command value -
Additional level
heating
Command value -
Additional level
heating
Name
RTC x - Output
RTC x - Output
Name
RTC x - Output
RTC x - Output
Type DPT Flag
1 bytes 5,001 C, (R), -, T,
-
1 bytes 5,001 C, (R), -, T,
-
Type DPT Flag
1-bit 1,001 C, (R), -, T,
-
1-bit 1,001 C, (R), -, T,
-
Page 174 of 257