Objects For Controller Status - Gira KNX 2139 00 Product Documentation

Room temperature controller | Controller status
Status object - RHCC
The room temperature controller can transmit its current status to the KNX. If the
parameter is activated, the object "Controller status RHCC" is visible.
Status object - RTC
The room temperature controller can transmit its current status to the KNX. If the
parameter is activated, the object "Controller status RTC" is visible.
Status object - RTSM
The room temperature controller can transmit its current status to the KNX. If the
parameter is activated, the object "Controller status RTSM" is visible.

10.6.2 Objects for controller status

Object no.
339, 389,
439, 489,
539, 589,
639, 689,
739, 789,
839, 889
1-byte object used by the controller to output the current operating mode. This object
is generally used to enable controller extensions to display the controller operating
mode correctly in the KNX compliant status display. Therefore this object should be
connected with controller extensions if the KNX compliant status feedback is not
configured.
After voltage return or an ETS programming operation, the current status is transmit-
ted via this object. This object is only available if the parameter "Status objects - Op-
erating mode" is activated.
Object no.
644
1-byte object used by the controller to output the current operating mode, taking the
forced position, presence status and window status into account. This object is only
available if the parameter "Status objects - Operating mode" is activated.
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Function
Operating mode -
Preset - Status
Function
Operating mode -
Active mode -
Status
Checkbox (yes / no)
Checkbox (yes / no)
Checkbox (yes / no)
Name
Controller x - Output 1 bytes 20,102 C, -, -, T, -
Name
Controller x - Output 1 bytes 20,102 C, -, -, T, -
Type DPT Flag
Type DPT Flag
Page 191 of 257