Table of Contents
Advertisement
Valve outputs | Operating hours counter
Counting direction
The operating hours counter can be configured as an up-counter or down-counter.
The setting here influences the visibility of the other parameters and objects of the
operating hours counter.
Specify signal value
If the up-counter is used, a signal value can optionally be predefined. The "No" set-
ting deactivates the limiting value.
This parameter is only visible in the "Up-counter" counter type.
Preset value
This parameter defines whether the signal value can be set via a separate para-
meter or adapted individually by a communication object from the bus.
This parameter is only visible in the "Up-counter" counter type.
Signal value
The limiting value of the up-counter is set here. Once the limiting value is reached,
an "ON" telegram is transmitted via the object "Operating hours counter - Counter
elapsed". The counter itself continues until the maximum counter status is reached
and then stops.
*: With second counter
**: With hour counter
This parameter is only visible if the parameter "Preset value" is set to "via para-
meter".
Specify start value
If the down-counter is used, a start value can optionally be predefined. This para-
meter defines whether the start value can be set via a separate parameter or adap-
ted individually by a communication object from the bus. The setting "No" deactiv-
ates the start value.
This parameter is only visible in the "Down-counter" counter type.
Preset value
This parameter defines whether the signal value can be set via a separate para-
meter or adapted individually by a communication object from the bus.
This parameter is only visible in the "Up-counter" counter type.
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Forward
Backward
Checkbox (yes / no)
via parameter
via object
0...2147483647*
0...65535**
Checkbox (yes / no)
via parameter
via object
Page 118 of 257
Advertisement
Table of Contents
