Gira KNX 2139 00 Product Documentation page 172

Room temperature controller | Command value output and command
value limit
Object no.
935, 977,
1019, 1061,
1103, 1145,
1187, 1229,
1271, 1313,
1355, 1397
966, 1008,
1050, 1092,
1134, 1176,
1218, 1260,
1302, 1344,
1386, 1428
*
1-bit object to output the switching command value of the heating mode. In two-level
heating mode, command value output for the basic heating. This object is only avail-
able in this way if the type of feedback control is configured to "Switching 2-point
feedback control".
* These objects are only visible if, with combined heating/cooling command value,
separate command value objects are also displayed.
Function: Command value
Object no.
935, 977,
1019, 1061,
1103, 1145,
1187, 1229,
1271, 1313,
1355, 1397
1-byte object to output the combined continuous command value of the heating and
cooling mode. In two-level heating/cooling mode, command value output for the ba-
sic level. This object is only available in this way if the command values for heating
and cooling mode are output to a shared object (parameter-dependent). The type of
feedback control must also be configured to "Continuous PI control".
Function: Command value
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Function
Command value -
Heating / Command
value, basic heating
Command value -
Heating / Command
value, basic heating
Function
Command value -
Heating/Cooling /
Command value ba-
sic level heating/
cooling
Name
RTC x - Output
RTC x - Output
Name
RTC x - Output
Type DPT Flag
1-bit 1,001 C, (R), -, T,
-
1-bit 1,001 C, (R), -, T,
-
Type DPT Flag
1 bytes 5,001 C, (R), -, T,
-
Page 172 of 257