Table of Contents
Advertisement
Operation and indication | ETS configuration
status display. If a temporary status indication has been activated by pressing the
"Manual operation" button, the object transmits the value "ON". If the object receives
a telegram with the value "OFF" or "ON", the status LEDs indicate the status of the
outputs according to the display length. Manual operation is not activated in this
case.
By linking the "Temporary status indication" objects of several actuators using a com-
mon group address, the indication functions of the status LED can be synchronized
with one another. It is thus possible to activate the status indications of all actuators
in a control cabinet at the same time if manual operation is triggered on one actuator
only - e.g. for service or maintenance purposes.
In addition, the "Temporary status display" object could be controlled, for example, by
a magnetic contact connected to the KNX, so that the status indications of all actuat-
ors are activated by opening the control cabinet door. If the door is closed, the status
indications for energy saving remain switched off.
During a running display length, the "Temporary status indication" object does
not transmit any new telegrams if the "Manual operation" button is pressed
again.
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Page 32 of 257
Advertisement
Table of Contents
