Gira KNX 2139 00 Product Documentation page 176

Room temperature controller | Command value output and command
value limit
Object no.
936, 978,
1020, 1062,
1104, 1146,
1188, 1230,
1272, 1314,
1356, 1398
1-byte object to output the combined continuous command value for additional level
in two-level operation. This object is only available in this way if the command values
for heating and cooling mode are output to a shared object (parameter-dependent).
The type of feedback control must also be configured to "Continuous PI control".
Function: Command value
Object no.
936, 978,
1020, 1062,
1104, 1146,
1188, 1230,
1272, 1314,
1356, 1398
1-bit object to output the combined switching PWM command value for additional
level in two-level operation. This object is only available in this way if the command
values for heating and cooling mode are output to a shared object (parameter-de-
pendent). The type of feedback control must also be configured to "Switching PI con-
trol (PWM)".
Object no.
940, 982,
1024, 1066,
1108, 1150,
1192, 1234,
1276, 1318,
1360, 1402
1-bit object for additional continuous output of the combined command value for ad-
ditional level in two-level operation. This object is only available in this way if the
command values for heating and cooling mode are output to a shared object (para-
meter-dependent). The type of feedback control must also be configured to "Switch-
ing PI control (PWM)".
Function: Command value
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Function
Command value -
Additional level
heating/cooling
Function
Command value -
Additional level
heating/cooling
Function
Command value -
Additional level
heating/cooling -
Status
Name
RTC x - Output
Name
RTC x - Output
Name
RTC x - Output
Type DPT Flag
1 bytes 5,001 C, (R), -, T,
-
Type DPT Flag
1-bit 1,001 C, (R), -, T,
-
Type DPT Flag
1 bytes 5,001 C, (R), -, T,
-
Page 176 of 257