Table of Contents
Advertisement
Room temperature controller | Controller status
10.5.2 Objects for temperature measurement
Object no.
1437, 1447,
1457, 1467,
1477, 1487,
1497, 1507,
1517, 1527,
1537, 1547
2-byte object for the display of the actual temperature active in the controller (room
temperature). The possible temperature range is specified by the received temperat-
ure values and corresponds to the range specified by the KNX DPT 9.001.
The temperature value is always output in the format "°C".
Object no.
1438, 1448,
1458, 1468,
1478, 1488,
1498, 1508,
1518, 1528,
1538, 1548
2-byte object for coupling an external KNX temperature sensor (e.g. push-button
sensor with temperature measurement) for room temperature detection. The pos-
sible temperature range is specified by the KNX DPT 9.001.
The temperature value must always be specified in the format "°C".
Object no.
1439, 1449,
1459 1469,
1479, 1489,
1499, 1509,
1519, 1529,
1539, 1549
2-byte object for coupling an external KNX temperature sensor (e.g. push-button
sensor with temperature measurement) for room temperature detection. The pos-
sible temperature range is specified by the KNX DPT 9.001.
The temperature value must always be specified in the format "°C".
10.6
Controller status
Heating/cooling message
Depending on the set operating mode, separate objects can be used to indicate
whether the controller is currently demanding heating or cooling energy and is thus
actively heating or cooling. As long as the heating command value is > "0", a "1" tele-
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Function
Room temperature -
Actual value -
Status
Function
Room temperature -
Measured value 1
Function
Room temperature -
Measured value 2
Name
RTC x - Output
Name
RTC x - Input
Name
RTC x - Input
Type
DPT
Flag
2 bytes 9,001
C, R, -, T, -
Type
DPT
Flag
2 bytes 9,001
C, -, W, T,
U
Type
DPT
Flag
2 bytes 9,001
C, -, W, T,
U
Page 187 of 257
Advertisement
Table of Contents
