Gira KNX 2139 00 Product Documentation page 179

Room temperature controller | Command value output and command
value limit
Object no.
937, 979,
1021, 1063,
1105, 1147,
1189, 1231,
1273, 1315,
1357, 1399
968, 1010,
1052, 1094,
1136, 1178,
1262, 1304,
1346, 1388,
1430 *
1-bit object to output the switching command value of the cooling mode. In two-level
cooling mode, command value output for the basic cooling. This object is only avail-
able in this way if the type of feedback control is configured to "Switching 2-point
feedback control".
* These objects are only visible if, with combined heating/cooling command value,
separate command value objects are also displayed.
Object for command value output, additional cooling
Function: Command value
Object no.
938, 980,
1022, 1064,
1106, 1148,
1190, 1232,
1274, 1316,
1358, 1400
969, 1011,
1053, 1095,
1137, 1179,
1221, 1263,
1305, 1347,
1389, 1431
*
1-byte object to output the continuous command value for additional cooling in two-
level operation. This object is only available in this way if the type of feedback con-
trol is configured to "Continuous PI control".
* These objects are only visible if, with combined heating/cooling command value,
separate command value objects are also displayed.
Function: Command value
Heating actuator 6-gang with controller | Order no. 2139 00 | 21393100
Function
Command value -
Cooling / Command
value basic level
cooling
Command value -
Cooling / Command
value basic level
cooling
Function
Command value -
Additional level
cooling
Command value -
Additional level
cooling
Name
RTC x - Output
RTC x - Output
Name
RTC x - Output
RTC x - Output
Type DPT Flag
1-bit 1,001 C, (R), -, T,
-
1-bit 1,001 C, (R), -, T,
-
Type DPT Flag
1 bytes 5,001 C, (R), -, T,
-
1 bytes 5,001 C, (R), -, T,
-
Page 179 of 257