Rear Bearing Carrier Installation - Polaris RZR 900 2015 Service Manual

FINAL DRIVE

REAR BEARING CARRIER INSTALLATION

1. Install drive shaft through the back side of the bearing
carrier.
2. Install the fasteners
lower control arms to the bearing carrier. Torque bolts
to specification.
TORQUE
Rear Bearing Carrier Mounting Fasteners:
42 ft-lb (57 Nm)
3. Apply a small amount of anti-seize to the drive shaft
splines.
9926814 R08 -
7.8
q
that attach the upper and
4. Install rear wheel hub assembly
and hand tighten the castle nut. Install washers
domed side out.
5. Install the rear brake caliper assembly and new bolts
r
. Torque bolts to specification.
Brake Caliper Mounting Bolts:
2015-2016 RZR 900
w
, cone washers
TORQUE
46 ft-lb (62 Nm)
2016 RZR S 1000 Service
© Copyright Polaris Industries Inc.
e
Manual