Polaris RZR 900 2015 Service Manual page 105

16. Remove the three fasteners retaining the harness to
k
the intake manifold and two fasteners retaining the
harness by the transmission switch
17. Remove the three harness clamps on the intake
1 (
manifold . Move the main harness out of the way
towards the driver's seat.
18. Disconnect the two fuel rail mounting bolts and move
the fuel rail off to the driver's side.
CAUTION
Be careful not to pinch or kink the fuel rail.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
19. Remove the four fasteners retaining the intake
manifold to the engine
l
. bottom of the intake manifold to the transmission
bracket
20. Remove the PVT outer cover.
21. Remove the belt and driven clutch.
22. Remove the drive clutch from the vehicle using the
correct drive clutch puller (PN 2872085).
2015-2016 RZR 900
ENGINE / COOLING SYSTEM
2)
and the one retaining the
2!
.
2016 RZR S 1000 Service
3
3.27