ENGINE / COOLING SYSTEM
ENGINE DISASSEMBLY / INSPECTION -
TOP END (1000)
VALVE COVER REMOVAL
NOTE
The valve cover can be removed with the engine
installed in the chassis.
1. Remove the four valve cover shoulder bolts
w
isolators
using a T40 driver.
w
2. Replace isolators
replace valve cover seal
3. Remove the spark plugs
with shop towels to prevent anything from falling into
the combustion chamber.
9926814 R08 -
3.94
q
when they are removed and
e
if oil leaks are evident.
r
. Stuff spark plug holes
CAMSHAFT REMOVAL
The camshafts can be removed with the engine
1. Rotate the engine so the PTO cylinder is at Top
Dead Center (TDC) to relieve most of the valve
spring pressure. The camshaft lobes should face out
q
and the slots on the end of the camshafts should
and
line up.
2015-2016 RZR 900
NOTE
installed in the chassis.
2016 RZR S 1000 Service
© Copyright Polaris Industries Inc.
Manual