Polaris RZR 900 2015 Service Manual page 217

13. Verify cam timing is correct. Flywheel TDC mark
should still be aligned (see Step 1) and cam sprocket
markings should line up as shown.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
14. If timing marks are not aligned, remove sprockets
and correct alignment.
15. Remove the Cylinder Holding & Camshaft Timing
Plate (PU-50563) from the end of the camshafts.
16. Rotate the engine using the flywheel and install the
remaining bolt in each camshaft sprocket. Torque the
sprocket bolts to specification.
17. Rotate the engine using the flywheel and torque the
remaining sprocket bolts to specification.
18. Install the front camshaft carrier
retaining bolts.
19. Install the fixed cam chain guide
bolts.
2015-2016 RZR 900
ENGINE / COOLING SYSTEM
TORQUE
Camshaft Sprocket Bolts:
14 ft-lb (19 Nm)
o
and two outer
a
and two retaining
2016 RZR S 1000 Service
3
3.139