Polaris RZR 900 2015 Service Manual page 312

PVT SYSTEM
4. If removed, install the rollers
u
clips onto the spider.
5. Install the spring so the arm
the moveable sheave.
o
6. Align the X's on the spider and moveable sheave.
7. Install the universal clutch compressor on the clutch
and compress the helix cover.
9926814 R08 -
5.38
t y
, washers and E-
i
rests into the notch in
2015-2016 RZR 900
CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.
8. Align the marks previously made on the helix cover
and moveable sheave. Install the helix/cover and the
a
four fasteners . Torque fasteners to specification.
TORQUE
Helix Retaining Screws:
48 in-lb (5 Nm)
9. Once back together, verify the grease / tape marks
made during disassembly are properly aligned.
10. Install the drive clutch on the vehicle. See PVT
Assembly, page
2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.