Rear Prop Shaft Removal (4 Seater) - Polaris RZR 900 2015 Service Manual

7. Align the front prop shaft paint mark with the front
gearcase input shaft mark so the holes align. Install a
new roll pin.
8. Install wheel and wheel nuts. Torque wheel nuts to
specification.
TORQUE
Wheel Lug Nuts:
Aluminum: 120 ft-lbs (163 Nm)
Steel: 60 ft-lb (81 Nm)
9. Install the center console.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.

REAR PROP SHAFT REMOVAL (4 SEATER)

1. Remove all seats.
2. Remove the front and rear center consoles (Refer to
Rocker Panels / Rear Console / Floor - 4 900, page
10.21).
3. Remove the fasteners
plates
4. Remove center and rear skid plates.
5. Remove the fasteners
bearing cover
6. Move the prop shaft support bearing assembly to the
drivers side to slide the rear prop shaft yoke
transmission output shaft.
2015-2016 RZR 900
q
from center
e
.
r
securing the support
t
to the frame.
2016 RZR S 1000 Service
FINAL DRIVE
w
and rear skid
7
y
off the
7.21