Driven Clutch Bushing Service - Polaris RZR 900 2015 Service Manual

PVT SYSTEM
10. Press out the spring pins
11. Pull out the clutch roller pins
12. Press the shaft and bearing out of the outer sheave
using an arbor press.
9926814 R08 -
5.28
a
in the inner sheave.
s d
and rollers .
2015-2016 RZR 900
f
13. Inspect the bearing
the bearing does not spin smoothly, replace it. To
replace the bearing, remove the snap ring
end of the shaft and press the bearing off the shaft.
14. Inspect the cam (helix) assembly bushing
If the bushing is worn or the shaft does not fit snug
into the bushing, replace the cam (helix) assembly.
15. Inspect the sheaves for excessive wear or damage.

DRIVEN CLUTCH BUSHING SERVICE

NOTE
Special Tools Required for this service
Special Tools
PART # TOOL DESCRIPTION
Clutch Bushing Tool Kit (see breakdown
2201379
below)
2870386 Piston Pin Puller
Clutch Bushing Replacement Tool Kit
2871226
(see breakdown below)
for wear. Spin the bearing, if
g
from the
h
for wear.
2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.