Polaris RZR 900 2015 Service Manual page 324

TRANSMISSION
14. If internal transmission repair is required, drain the
transmission lubricant (see Chapter 2 – Transmission
Lubrication, page 2.26).
15. Remove the stabilizer bar mounting bolt and nut
from both sides. Discard nuts and replace with new
upon assembly.
16. Remove the fasteners
arms to the bearing carriers (left and right side).
Discard nuts and replace with new upon assembly.
Allow the radius rods swing downward.
17. Pivot the control arms downward and maneuver the
drive shafts out of the vehicle frame.
9926814 R08 -
6.8
j
attaching the upper control
Be careful not to stretch the brake line when pivoting
the bearing carrier downward.
h
18. Place a spacer or support between the vehicle frame
and engine to hold the engine up in position.
19. Remove the PVT outer cover.
20. Remove the belt and driven clutch.
21. Remove the drive clutch from the vehicle using the
correct drive clutch puller (PN 2872085).
2015-2016 RZR 900
CAUTION
2016 RZR S 1000 Service
© Copyright Polaris Industries Inc.
Manual