Engine Break - Polaris RZR 900 2015 Service Manual

ENGINE BREAK-IN
The break-in period consists of the first 25 hours of
operation, or the time it takes to use 15 gallons (57 liters)
of fuel. Careful treatment of a new engine and drive
components will result in more efficient performance and
longer life for these components.
CAUTION
Use only Polaris PS-4 or PS-4 Extreme Duty Synthetic
4-Cycle Engine Oil. Never substitute or mix oil brands.
Serious engine damage and voiding of warranty can
result. Do not operate at full throttle or high speeds for
extended periods during the first three hours of use.
Excessive heat can build up and cause damage to
close fitted engine parts.
1. Fill fuel tank with unleaded fuel which has a minimum
pump octane number of 87 = (R + M)/2.
2. Refer to Chapter 2 – Engine Oil Level, page 2.13.
Check oil level indicated on dipstick. Add oil if
necessary.
3. Drive slowly at first to gradually bring engine up to
operating temperature.
4. Vary throttle positions. Do not operate at sustained
idle or sustained high speed.
5. Perform regular checks on fluid levels, controls and
all important bolt torques.
6. Change oil and oil filter after 25 hour break-in period.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
2015-2016 RZR 900
ENGINE / COOLING SYSTEM
2016 RZR S 1000 Service
3
3.33