Polaris RZR 900 2015 Service Manual page 210

ENGINE / COOLING SYSTEM
a
17. Install dowel pins into oil pump mounting holes.
18. Install the three bolts
crankcase. Torque mounting bolts to specification.
TORQUE
Oil Pump Mounting Bolts:
7 ft-lbs (10 Nm)
19. Reinstall oil pump pick-up
screws to specification.
TORQUE
Oil Pump Pick-Up Retaining Screws:
7 ft-lb (10 Nm)
20. Clean the gasket sealing surfaces on oil sump cover
and crankcase to remove old gasket material and
any oil.
NOTE
Gasket surfaces must be DRY and oil free. Use care
upon assembly to keep oil away.
9926814 R08 -
3.132
f d
that retain oil pump
s
. Torque mounting
21. Apply a thin, continuous film of Crankcase Sealant
(PN 2871557) to sump cover mating surface
shown. Do not allow sealant to dry before assembly.
to the
22. Install the oil sump cover
23. Install the thirteen M6
retain the oil sump cover
2015-2016 RZR 900
g
h
onto the crankcase.
j
and three M8 bolts that
k
to the crankcase.
2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.
as