Engine / Chassis Ground; Spark Plug Service - Polaris RZR 900 2015 Service Manual

Table of Contents

12.0 or less

Follow the charger instructions supplied by the

manufacture regarding the order or connections, switch

positions and when to connect the charger to an outlet.

ENGINE / CHASSIS GROUND

Inspect the ground cable connections. Remove ground

terminals and clean if necessary.

The chassis ground connection

start solenoid

, can be accessed through the left rear

Inspect the chassis ground terminals. Be sure the

grounds are clean and tight.

9926814 R08 -

, located below the

2015-2016 RZR 900

Inspect and replace the spark plugs at the intervals

outlined in the Periodic Maintenance Chart.

1. Remove the cargo box access panel

A hot engine can cause serious burns. Allow engine to

cool or wear protective gloves when removing the spark

2. Remove both spark plug caps

Use MAG and PTO reference decals on spark plug

wires for reassembly.

3. Clean out plug wells with compressed air to remove

any loose dirt or debris.

4. Rinse plug wells with water and dry with compressed

Spark plug wells have drain holes built into the cylinder

head to allow water to drain out.

2016 RZR S 1000 Service

Table of Contents