Pvt Break-In (Drive Belt / Clutches) - Polaris RZR 900 2015 Service Manual

Table of Contents

PVT BREAK-IN (DRIVE BELT / CLUTCHES)

A proper break-in of the clutches and drive belt will

ensure a longer life and better performance. Break in the

clutches and drive belt by operating at slower speeds

during the 10 hour break-in period as recommended (see

Chapter 3 Engine Break-In Period, page

for break-in

example). Avoid aggressive acceleration and high speed

operation during the break-in period. After installation of

a new drive belt, break-in new drive belts by operating at

slower speeds during the break-in period ~50 miles.

Carry only light loads. Avoid aggressive acceleration,

high speed operation, and extended time at a specific

RPM during the break-in period. In addition, when

operating in sand/dune environments, avoid extended

low speed operation at high throttle.

9926814 R08 -

2015-2016 RZR 900

2016 RZR S 1000 Service

Table of Contents