Polaris RZR 900 2015 Service Manual page 135

9. If the auxiliary sprocket is damaged, remove the
sprocket with a 3-jaw puller.
10. Using an arbor press, install new sprocket in any
orientation to the depth shown in the following
illustration.
MEASUREMENT
Auxiliary Sprocket Installed Depth:
4.9527 ± .0078" (125.8 ± 0.2 mm)
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
11. Support crankshaft on V-blocks or on-centers in a
crankshaft stand or lathe. Measure crankshaft runout
where indicated and replace if runout exceeds
maximum listed below.
12. Visually inspect surface of crankshaft main and
connecting rod journals. Replace crankshaft if any
journal is scratched or pitted.
13. Measure each main journal and connecting rod
journal in two locations, 90 degrees apart. Replace
crankshaft if any journal is worn below the service
limit specification.
i
MAG End
o
Main Journal 1
a
MAG Rod Journal
s
Main Journal 2
2015-2016 RZR 900
ENGINE / COOLING SYSTEM
MEASUREMENT
Crankshaft Maximum Runout:
.001" (0.025 mm)
d
PTO Rod Journal
f
Main Journal 3
g
Main Journal 4
h
PTO End
2016 RZR S 1000 Service
3
3.57