Polaris RZR 900 2015 Service Manual page 301

3. Remove the four screws
(helix) assembly using a T25 Torx driver.
4. Place the driven clutch into the Universal Clutch
Compressor.
Universal Clutch Compressor: PU-50518-A
5. Press down on the top of the spider assembly,
pushing the spider onto the shaft. Remove snap ring
e
and slowly release the assembly.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
w
that secure the cam
2015-2016 RZR 900
6. Remove the spider assembly
NOTE
Spring is compression only and has no torsional wind.
7. Remove the inside spider plate
y
dampener . Inspect the spider dampener for wear
and replace if needed.
u
8. Remove the E-clips , washers
o
rollers . Inspect the rollers for wear; replace if worn.
9. Remove the clutch assembly from the holding tool.
2016 RZR S 1000 Service
PVT SYSTEM
r
and spring.
5
t
and spider
i
, and the clutch
5.27