Power Steering Unit Installation - Polaris RZR 900 2015 Service Manual

POWER STEERING UNIT INSTALLATION

1. If the power steering unit
w
mount bracket , reinstall it prior to vehicle
installation. Torque the mounting bolts
specification.
TORQUE
Power Steering Unit Mounting Bolts:
30 ft-lb (41 Nm)
2. Install the power steering unit into the vehicle and
align the skip-tooth spline
stub shaft with the opening in the lower steering shaft
t
.
3. Place the power steering mount bracket over the top
of the brake pedal mount studs and finger tighten the
four nuts.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
q
was removed from the
e
to
r
on the power steering
2015-2016 RZR 900
STEERING / SUSPENSION
4. Torque the four mount
specification.
TORQUE
Power Steering Unit Mount Bracket Nuts:
16 ft-lb (22 Nm)
5. Position the lower steering shaft on the power
steering unit stub shaft and install the pinch bolt.
Torque to specification.
TORQUE
Lower Steering Shaft to EPS Unit Pinch Bolt:
15 ft-lbs (20 Nm)
6. See Chapter 8 – Upper Steering Shaft Installation,
page 8.14 to complete the installation procedure.
2016 RZR S 1000 Service
y
bracket nuts to
8
8.13